Creating Prefix-Lists for BGP Routing 2

I spent this early afternoon finishing up the BSCI BGP Appendix section on prefix-lists for BGP, I mainly created a lab that specifies that that the network 172.30.0.0 /24 in the AS 65500 only shows as the supernet 172.0.0.0/8 in the AS 65000 BGP table as shown above. Tomorrow I will learn a little bit about BGP communities and go over what I've learned!

Don't forget to check out my CCNA Lab Book available at www.configurethenetwork.com, it's only going to available for the $9.95 price for another 2 days!

Creating Prefix-Lists for BGP Routing

I spent a good bit of my morning learning and configuring BGP prefix-lists which I will wrap up tomorrow most likely. Prefix-lists provide greater flexibility over access-lists due to the fact you're allowed more granular control of where you want input your statements inside the prefix list. This differs from the standard access-list where one no command on the ACL requires you to recreate the access-list completely! I'm still not entierly sure how prefix-lists differ from ip access-list commands which allows you to enter sequence number states like prefix-lists. I do know that you can control exactly how you want a neighbor BGP autonomous sysstem (AS) to know about external routes by using the le and ge commands.

The le and ge values are used in a prefix-list statement to create a range of the prefix length to be matched more specifically compared to the network/length commands used in the prefix-list statements. Prefix lists do provide the advantage of being less performance intensive due to not requiring the amount of route lookup processing sometimes required by large access-list tables.

As you can see in the above lab I worked earlier, the prefix list tells AS_65000 to only let AS_65002 know about the 172.16.0.0 /16 external network instead of the more specific 172.16.10.0 /24 and 172.16.11.0 /24 routes.

Don't forget to check out my CCNA Lab Book available at www.configurethenetwork.com, it's only going to available for the $9.95 price for another 3 days!

Configure the Network CCNA Lab Book is Here!!

WANT TO KNOW FOR SURE THAT YOU'RE READY TO TAKE AND PASS THE CCNA EXAM?

Don’t you want to verify that you’ve covered every main topic listed on the Cisco CCNA Exam? Wouldn’t it be great if there was a way to know if you’re ready for the hands on material that’s going to presented as simulations on the actual exam? Instead of another “How To” guide, wouldn’t it be cool to go through actual scenario based CCNA labs that’s used in the real world?

You’re in luck! The only Cisco CCNA Lab book you’ll ever need to verify if you’re ready or not for the CCNA Exam is right here. I promise it will help you solidify your CCNA Hands On Configuration Skills, to ensure that you’re ready tackle and obtain your CCNA Certification!

My CCNA Lab Book Includes the following:

- Over 15 Fully Featured CCNA Labs Based on Real World Scenarios

- Hints and Tips That are Helpful for Both the Exam and the Real World

- Web Links Within Each Lab For Additional Study Material And Tips

- Easily Accessible PDF File with Click-able Web Links and Shortcuts

The Full Version of the Configure the Network CCNA Lab Book is a $40 Value But For a Limited Time I'm Releasing This Book For Only the Low Price of $9.95!

The Low Price of $9.95 Will Only Be Available For a Limited Time!


"Testimonial"

BGP Summary and Aggregated Routes

I spent this morning briefly covering how to summarize routes in BGP using CIDR Aggregated Routes. BGP specifically uses the Atomic Aggregate attribute which is considered one of the well-known discretionary attributes. BGP also uses the optional transitive attribute called an Aggregator which specifies the BGP ID and the AS that performed the aggregation in BGP updates. If you aren't careful when planning which routes to summarize your AS could easily claim routes that it really doesn't own which could upset other AS's in the BGP system! AS's doesn't really use aggregation as much as they could because some are multihomed to many ISP's and would rather make sure that all of the routes that own are being advertised without being summarized into one route.

Policy Based Routing 2

This morning I created another PBR lab that I was able to wrap my head around a lot easier than yesterday. As you see in the above image, there are 3 routers in which specific LAN traffic from Router C should be routed out of Router A's Serial 0/0/1 interface. It was good to get some more hands on with route-maps the past few days. I'm going to work some more labs throughout the day most likely on BGP. My lab guide book should be here in another weeks so you should be seeing a ton of new labs from me here shortly!

Policy-Based Routing

Now that I finished the main book for BSCI, I'm now reviewing everything I learned and will spend most of my time creating labs and touching up the details. But before I do to much, Cisco was kind enough to include 5 extra Appendix PDF files to learn about some technology in even more detail. This is mainly appendixes on how to manipulate packets and even more BGP no surprise! I hear that in order to fully be perpared for the BSCI you have to dig even deeper than what the Self Study Guide book provides. This includes everything from reading white papers, CBT's, and creating labs for pretty much ANYTHING related to the exam.

Today I learned a little bit about Policy Based Routing (PBR) which is basically route-maps on steroids. Similar to how there are access-lists and then extended access-lists (access-list on steroids), PBR allows you to maniplulate routes in a more granular manner. Tomorrow I'll be finishing this appendix up and moving to the last few that are left.

Don't forget to download my FREE CCNA Lab book for the ICND1 course at www.configurethenetwork.com while it's still available. The full version of the lab book is FINISHED and ready to sell, I'm just working on some things on the back end. The full lab contains 17 scenario based CCNA labs that will test your theory on every topic included in the CCNA

IPv6 End of Chapter Configuration

Well I Finally Finally Finally made it through the entire CCNP Self Study Guide book. I polished off the rest of the book by finishing the end of chapter lab for IPv6. I managed to get through most of the tasks successfully but I'm still having troubles setting up IPv6 tunnels and I'm not sure why. Even after mirroring the configuration settings exactly, I've been unable to bring the tunnels up. Hopefully I can figure out what was missing by doing a little research aka Google. The next step for me will be going through the exam-guide and lab guide, I'm hoping to get through these two books in about two months so I can sit the test in April!