Chapter 5 Configuration Lab

I'm finally doing with Chapter 5 learning about OSPF and how to tune it specifically to your needs. Next up is a totally new technology for me IS-IS (Intermediate System-to-Intermediate System) Protocol. All I know about it so far is that it's a link-state protocol and word on the street is that it's way simplier than OSPF! I'm betting so since this chapter is only about 60 pages compared to the two 70 page chapters on OSPF. I plan on doing the end of chapter multiple choic answers here shortly or tonight and messing around with som OSPF labs I'm finding on the website http://www.sadikhov.com/forum/

OSPF Authentication and Virtual Links

I polished off the rest of the CCNP theory in the Study Guide book by going through the last few pages regarding Virtual Link connections and OSPF Authentication. You would think Cisco would of made EIGRP authentication configuration similar and as easy as OSPF is. Anyways you set these two protocols up completely different which just adds to the growing list of things I'm going to need to remember for the exam. I'm about at the half way mark in a 700 page book which only took me about a month. I estimated that it would take me around 4-5 months so I'm making real good progress. I ordered the CCNP BSCI Portable Command Guide which should come in handy when I want to get quick study sessions in during the days I work. I plan on ordering the BSCI lab guide and the exam guide once I'm near complete with this book. I can't believe how much in-depth this material is, 4 books for 1 exam for a 4 exam certification. in layman's terms it's going to take me 16 books to get this certification at this rate! In actuality though, this is the hardest out of the 4 so once I knock this one out it should be all down hill from that point. I bet I'll need at least 8-10 books though all together which is a big difference than the 2 I needed for the CCNA Certification. Even the 2 books for the CCNA was a bit overkill for that exam honestly!

OSPF Stub Types

I spent this Christmas morning studying and configuring the 3 stub types, Stub Area, Totally Stubby Area, and NSSA (Not So Stubby Area). I'm not going to even ask who came up with those names but the material made since as long as you undertood how it effects the LSA type you receive in that particular area. I also ran into something I NEVER noticed so far in the past 8 months I've been learning about Cisco. If you have two directly connected serial interfaces, you CAN'T ping you're own serial IP address if the other side of the serial link is misconfigured in any way. I spent a better part of 30 minutes troubleshooting this problem and even blaming it on the GNS3 program itself until I did a little research. Even if your serial interface shows up/up, if you can't ping your serial IP it's a good chance there's a misconfiguration on either side of the point-to-point connection. MERRY CHRISTMAS!

OSPF Default Route Summarization

My lab studies today was kinda of all over the place. One of the labs I created was testing out connections to my PC's loopback and watching frames be put on the wire (with Wireshark) to my GNS3 lab. Well some how during the testing of this I lost DNS connectivity with my PC and I couldn't for the life of me figure it out. I didn't realize it was an issue with DNS until I tried connecting to google.com using it's IP address and worked but couldn't by using it's host name. After about an hour of t-shooting my own home network (including replacing a router-switch) a simpl reboot fixed all my issues. Troubleshooting 101 tip...reboot your computer first to see if this resolves your problems! Anyways after that fiasco, I finished my studying today about learning a little bit about the different stub types and configuring a multi-homed OSPF lab dealing with route summarization.

Chapter 5 Advanced OSPF Configuration

I began my studies on chapter 5 in the CCNP BSCI Study Guide book on OSPF this morning. I could tell immediatly that the level of depth ramped up and I'm positive it will remain this way from hear on out. The first 4 chapters seemed more like review to me and I was kind of worried I wasn't studying hard enough because I didn't seem to gain a deeper knowledge really of the material and understood most of the topics before I even read the chapters. This Chapter is really starting to show me why they can consider this a professional certification. I'm going to have to cut off all distractions during my study time (well besides my music) such as TV, Internet, etc. It actually worked out quite well this morning as I was able to read what I needed to and created a decent sized lab in about half the time it usually takes me. I learned about the many LSA types and when they are used today. I finished up today by creating a lab that shows the different LSA types sent based on the routers role. In this lab you'll see a couple of ABR's (Area Border Routers), an ASBR (Autonomous System Border Router), and internal routers in their respective areas.

CCNP Chapter 4 OSPF Lab

This morning I polished off the rest of chapter 4 by completing the end of chapter lab which wasn't to bad. I was able to barely finish as an issue arrived with a customers PIX being down. I will finish up the chapter review questions tonight and prepare to move on to the advance routing section this upcoming week. I also will start going over this network security design book an engineer was able to loan out. It's probably a good idea to double up on the security and CCNP studies, I think CCSP might be my next exam after CCNP of course. I also configured quite a bit of different labs concerning OSPF settings when running over a NBMA network last night and this morning. I'm sure I'll be coming back and brushing over a lot of this material again when it comes closer to test time.

Configuring Basic OSPF Routing

Today I spent the better part of my morning configuring two simple OSPF labs along with reviewing the different show and debug commands. It was mostly review but I did get a better understanding of how the OSPF process works by watching the debug commands take place on the routers them selves. I finished off today by studying about the different OSPF network types which are Broadcast, Point-to-Point, and NBMA (Non-Broadcast Multi Access) Networks. Tomorrow I learn about about the subtleties between the OSPF Adjancies along with learning and configuring a few different types of NBMA setups using Frame-Relay of course.